홈< 제품소개 < HIRAYAMA < HB-305M    
HB - 305M Biohazard Preventive Autoclave
   
 
품       명 AUTOCLAVE
모  델  명 HB - 305M
제  조  국 일 본
제  조  사 HIRAYAMA

제품 사양





- 외형 치수(W×D×H) : 504× 697 × 990mm
- 챔버 내경 : 300 × 400mm
- 용량 : 28 liters
- 챔버재질 : 스테인레스 스틸 (SUS 304)
- 최대 압력 : 1 MPa
- 살균 온도 : 105℃∼123℃
 
 
Aerosol prevention.   The equipment cost is cheap.
The pathogenic microorganism that adhered to unsterilized air, non-sterile vapor, etc. is not emitted due to the perfet direct vent system.   Since the institution which does not have a high amount of equipment expenses and a big space for the facilities can install this equipment in a laboratory, the disposal of a pathogenic microorganism can also be performed safely.
Physical containment.   High temperature and prolonged sterilization.
Even the virus which penetrates a filter(0.22㎛)easily can not be emittd due to the perfect direct vent system.   This equipment having the function of the highest temperature of 123℃ and the longest sterilization time of 999minutes is also the best to sterilize such laboratory animals as a rat, a rabbit, to which the temperature does not permeate easily.
High security and easy to control.   Safety procedures of infectious waste.
There is also no filter exchange which may have the danger of secondary in fection. it is very easy to control and a running cost is cheap.   Basic rule for safe processing of infectious waste is that the waste shall not be moved but shall be sterilized at the generated place. This the most safety method with no>>£certainty..
   
 
 
Model HB-305M
    Overall size 504W × 697 D × 990 H mm
    Chamber size( capacity) 300 φ × 400 D mm (28 Liter)
    Power source Single phase AC 220V/ 230V/ 240V 2.0kW
    Net weitht (approx.) 80 Kg
   Type of pressure vessel Small-sized pressure vessel
    Chamber material SUS304 (Stainiess steel)
    Sterilization temperature range 105 to 145 ℃
    Sterilization timer 1-999 minutes. With remaining time display and continual operation function
    Selective cycle Standby → Heating → Sterillaztion (adjustable) → Completion
    Exhaust control Adjustable with fine exhaust valve
    Exhaust bottle (when filled with water) 13 liters (built - in bottle)
    Safety valve operation pressure 0.549 MPa
    Thermometer 5 to 127℃(digital)
    Pressure gauge 0 to 1 MPa
  *Pressure safety valve                                       *Over-pressure prevention device
    Safety devices/   *Temperature sensor wire breakage detector   *Over-heat prevention device
    Warning alarms   *Lack-of-water protection device                      
    *Electric leakage breaker and over current detector sterilization timer haltion function
    *Abnormality detector for sterilization heater
    Standard accessories     SS bucker, Heater cover,  Exhaust hose, Exhaust bottle,  Eye nuts tightening tool
    Type of plug     3-wire with circle terminal. Plug is out of supply scope, to be prepared by user
※Remarks: If the equipment is used at a place with an above sea level of 800 m of more ( under low pressure of a mountainous area ), please inform us when ordering.
 
 
   Optional : Recorder 1P (ES-600)-with on piece of sensor
   
   Optional accessories: 1)  Stainless steel wire basket
  2)  Stainless steel bucket
  3)  Detergent for autoclave   -Powerful detergent for washing inside chamber of autoclave
  4)  Deodorizer for autoclave   -100 doses / bottle
  5)  Sterilization tape, label, bah.Please ask us for details.
  6)  Plastic bag for sterilizing waste with autoclave(200sheets)- a.500 ×700mm b. 620 ×820mm