A. Features ;
   1. Multy cooling system by two cooling devices(400W×2) will cool up to -75℃ and collect
      liquid without fail.
   2. Line up for multi-hold tubes(4ports or 8ports etc.), dry chamber and airtight 
      chamber. Easy to attach and detach them. 
   3. Operating is easy Owing to uniform standardization of accessories. 
   4. Pushing a defrosting button shortens the thrawing time by flowing hot gas in the
      cold trap. Two litters portion of ice will be eliminated in about 10 minuites.
   5. Equipped with a high pricision vaccum meter. So current vaccum rate can be read
      precisely at once.
   6. Functional cold trap is set horizontally and it makes you easy to remove ice & clean up.
   7. You can pre-freeze the sample in the cold chamber and also watch inside through 
      a transparent acrylic window.
   8. Equipped a plate on the left side of the unit. You can use space efficiently by 
      folding the plate when not in use. The vacuum pump is operated on the front panel.
   9. Capable of operating in small space 
  10. Vacuum pump's power supply is available from the unit and can switch on and 
      off on the front panel.
  11. Equipped a plug for Dry chamber and Airtight chamber.
  12. Capable of easy repairing on troubling by separated between main body and  vacuum part.
  13. Most suitable dry system for sample in the sample bottle. 
  14. It can be packing in the chamber of vacuum state
  15. Drying speed very high also heating the silicon rubber
  16. High vacuum pumping systems, backing systems for electron microscopes.
 
B. Specifications ;
   1) Working Temperature : -75℃ 
   2) Dehumidification capacity : 2 Liter per a time 
   3) Inner capacity : 11.7Liter (I.D ; 210mm x 345Dmm)
   4) Freezer : Closed air-cooling model ( 400 W / Two dimension method )
   5) Dimension : 490 x 600 x 805 mm
   6) Power Supply : AC 100V, 13A (only mainframe) AC 100V, 23A (with 400W Vacuum Pump)
   7) Other functions
      - Attach the three P concent for vacuum pump
      - Connecting diameter of vacuum hoss : 22㎜
      - Solute of frost by photo-gas          
      - Attach the electrical mode for remove of vacuum
   8) Weight : Approx. 97 Kg

C. Accessories
   1) Adaptor cock(AD-0550) 8 EA
   2) Flask adaptor(AD-0180) 8 EA
   3) Test tube adaptor(AD-0401) 8 EA
   4) Freezing bottle with cap(FB-6050) 4 EA
   5) Freezing bottle with cap(FB-9100) 4 EA

D. Remark ;
   1. Tools and manuals for operation and maintenance should be supplied with Basic unit
      as standards.
   2. Test-run and installation should be performed by distributor engineer.
   3. Test-run and Installation fee is free of charge.
   4. Two year warranty service should be provided from the data of final set up.
          E. Option for Freeze Dryer
 
Accessories(Option)

①	②	③

①	②

	①	②	③
	④	⑤	⑥
※①②③은 MP-020/060/080用이고, ④⑤⑥은 MP-040/240用임

DC-120 DC-260 적용제품 VD-250F/VD-500F VD-400F/VD-800F 온도조절기 Thermoster식 Thermostat 히터 70W×1 100W×3 선반 1단(Φ180mm) 3단(Φ185mm) 외형치수 Φ225×200Hmm Φ225×380Hmm 전원 AC100V, 0.7A AC100V, 3A

SC-180 SC-305 적용제품 VD-250F/VD-500F VD-400F/VD-800F 온도조절기 Thermoster식 Thermostat(30℃ 고정) 히터 70W×1 100W×2 선반 1단 3단 외형치수 Φ225×300Hmm Φ225×450Hmm 전원 AC100V, 0.7A AC100V, 2A

	크기(㎜) 용량(㎖) 폭 높이 FB-4007 40 80 75 FB-4010 40 100 100 FB-4015 40 140 150 FB-6020 60 100 200 FB-6030 60 130 300 FB-6050 60 200 500 FB-9075 90 140 750 FB-9100 90 180 1000 FB-9120 90 220 1200

7. 셀 스핀	8. 유회전 진공펌프
VS-60 용기 나스형 flask: 1개 회전수 0~60r/min,無段가변 치수 115×112×90Hmm	VS-60 배기량(ℓ/min) 일반 GLD-136 135~162 특수 GLD-135AX